MBCFB Motobatt 12V Fatboy Charger

SKU: MBCFB
$55.00
Motobatt Maintenence Charger Fat Boy 
2.0 Amp 9 Step Motobatt Fully Automatic.

Suits batteries up to 100AH. 
Leave permanently connected to reduce hassle and extend battery life.
  • 12V 2.0A 9 Step Algorithm
  • AGM and Sealed Lead Acid Compatible
  • Suggested for 4 to 100AH Batteries
  • Premium Retail Packaging
  • Includes: 21" Clip and Eyelet Maintenance leads
  • Wall Mountable
  • Optional: MBCFB25 with 1x25" extension lead.

Motobatt FatBoy 12V 2.0 Amp Charger 

With 2.0 Amps of current you will get the largest Powersports batteries charged with this fast "Self-Sensing" 9 Step Fully Automatic Charger. There is no need to flick switches, or wonder what those flashing lights mean. Red stop, yellow working on it, green go.  Plug and Leave.

Click the Link below to see MBCFB Video


Application:

Where faster Charging times are needed

Motobatt's clever Microprocessor reads the correct voltage of the battery connected, the 9 Phase process monitors the battery resistance 100's of times per second during charging mode.

Qualification Stagechecks the battery is over 2V for safety reasons, then transitions to "Rescue" Phase where an arsenal of 5 different recovery modes can be utilised to revive heavily Sulphated or deeply discharged batteries. Generally at this stage unusually high voltage is seen early in the charge cycle, once the rescue phase is done the battery is ready for

Soft Start Phase When the charger detects a low initial state of charge, voltage and current are delivered at a specific rate to assist the battery recovery before entering Pulse charging mode.

Pulse Phase provides a high frequency pulse charge to help the newly recovering battery to accept charge as it enters recondition mode.

Recondition Phase continues to work the battery at a slightly higher voltage and amperage to re-activate the battery plates for improved depth of charge. Now that the battery has been eased back to life…….

Bulk charge phasecan begin giving constant current to the battery up to about 80% of its capacity.

Absorption Phase begins with constant voltage being supplied while current is reduced. This occurs according to the batteries ability to accept charge up to 100%.

Check Phase is now activated to monitor the batteries ability to hold the charge properly, if not it will cycle back through the entire process for 24 hours or more until it determines the battery cannot be recovered. For revived batteries it then enters

Maintenance Phase where the battery can stay indefinitely connected to the charger. As the battery drops voltage while unused, the unit will activate when needed to ensure a full state of readiness.

Keeping your batteries properly maintained will dramatically Extend working Life.
Motobatt Fatboy 12v 2.0 Amp 9 Step Auto Charger Maintainer with Ring Terminals Included